RepRap/Configs/Slic3r/print-abs-0.3mm.ini
- generated by Slic3r 1.2.9 on Fri Jan 29 00:56:08 2016
avoid_crossing_perimeters = 1 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 30 brim_width = 0 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 external_perimeter_speed = 26 external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.5 fill_angle = 45 fill_density = 15% fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0.5 first_layer_height = 0.3 first_layer_speed = 20 gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.5 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 15% infill_speed = 50 interface_shells = 0 layer_height = 0.3 max_print_speed = 80 max_volumetric_speed = 0 min_skirt_length = 10 notes = based on the official RepRapPro "Mendel ABS 05 nozzle.ini" from https://github.com/reprappro/profiles/archive/v1.0.tar.gz only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base]_Mendel_ABS.gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0.5 perimeter_speed = 32 perimeters = 2 post_process = raft_layers = 0 resolution = 0 seam_position = aligned skirt_distance = 6 skirt_height = 1 skirts = 1 small_perimeter_speed = 26 solid_infill_below_area = 5 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 solid_infill_speed = 40 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 85% support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 6 support_material_speed = 20 support_material_threshold = 45 thin_walls = 1 threads = 4 top_infill_extrusion_width = 0 top_solid_infill_speed = 32 top_solid_layers = 3 travel_speed = 250 xy_size_compensation = 0
